There are not standardization of fault codes can and do vary from manufacturer to manufacturer, even between models from the same manufacturer these codes may well be different. This guide is designed only as a generalized guide and is not intended to replace your owners manual, if you have problems always check the owners manual first, it may well have the information you need and will be specific to your Appliance. Au web site assume no responsibility for any action you may undertake as a result of using this guide.

Failure Code	Condition	Check/Repair
F1	Defective touch pad or membrane	Replace touch pad or clock assembly (also called the ERC) (usually the touch pad)
F1	Watchdog on board	Replace touch pad or clock assembly (also called the ERC)
F2	Oven too hot	Replace relay board (if present) or oven temperature sensor
F3 or F4	Open or shorted oven temperature sensor	Replace oven temperature sensor
F5	Hardware and watchdog circuits disagree	Replace clock assembly (also called the ERC)
F6	Missing AC signal	Check for proper voltage
F7	Function key shorted or stuck button	Replace touch pad or clock assembly (also called the ERC) or un-stick button
F8	Analog/Digital trouble	Replace clock assembly (also called the ERC)
F9	Door latch trouble	Check door lock circuit or replace clock assembly (also called the ERC)
F0	Function key stuck	Replace touch pad or clock assembly (also called the ERC)

Shop by Category

Shop by Brand

Defind Admiral Range/Stove/Oven Fault Codes

Fault Codes