Default Currency
Canadian Dollar
Product Description
Repairing Whirlpool, Kenmore Electric Dryer
Welcome to this electric dryer repair tutorial, in this tutorial of Appliance university will provide detailed instructions on safely disassembling a Whirlpool/Kenmore electric dryer, troubleshooting common issues such as starting problems, insufficient or excessive heat, and diagnosing and repairing common noises.
1. Safely disassembling a Whirlpool/Kenmore electric dryer:
- Before starting any repairs, always unplug the dryer from the power source to prevent any accidents.
- To disassemble the dryer, you will need to remove the top panel by unscrewing the screws at the back and sliding the panel off.
- Next, remove the front panel by unscrewing the screws on the top and bottom edges. Be sure to disconnect any wires attached to the door switch before completely removing the panel.
- To access the heating element take the back off, drum belt, or motor access from the front, as will as the drum removeal.
2. Common reasons for starting problems and how to resolve them:
- If your Whirlpool/Kenmore electric dryer is not starting or running properly, it could be due to a faulty door switch, thermal fuse, or start switch.
- Check the door switch for any signs of damage and replace if necessary.
- Test the thermal fuse for continuity using a multimeter and replace if it is blown.
- Inspect the start switch for any loose connections or damage and replace if needed.
3. Troubleshooting insufficient or excessive heat:
- If your dryer is not producing enough heat, it could be due to a faulty heating element, thermostat, or thermal cut-off fuse.
- Check the heating element for any signs of damage or continuity issues. Replace if necessary.
- Test the thermostat and thermal cut-off fuse for continuity and replace if they are faulty.
4. Diagnosing and repairing common noises:
- If your Whirlpool/Kenmore electric dryer is making unusual noises, it could be due to a worn drum roller, idler pulley, or blower wheel.
- Inspect the drum roller and idler pulley for any signs of wear and tear. Replace them if needed.
- Check the blower wheel for any obstructions or damage. Clean or replace it to resolve the noise issue.
In conclusion, this electric dryer repair tutorial has provided detailed instructions on safely disassembling a Whirlpool/Kenmore electric dryer and troubleshooting common issues such as starting problems, insufficient or excessive heat, and diagnosing and repairing common noises. By following these steps carefully, you can effectively repair your electric dryer and keep it running smoothly.
Outline of topics and chapters present in this tutorial:
- Safety
- Theory and operation
- No heart problems
- Will not start-no run problems
- Noise problems
- Insufficiendt heat problems
- Excessive heart problems
- Common problems and repairs
- Disassemble
